IFixit Tear Down The IPad Pro To Find Out What Your Money Goes Into

By 11:39 Wed, 28 Jul 2021 Comments


We have small doubt that you've already heard of Apple's "next gigantic thing" by now – the iPad Pro and the most impatient among you might even be reading this article on its crisp retina screen, seeing how it has been available for purchase for a day or so now.




The iPad Pro is gigantic in every sense of the word. The spacious 12.9 inch classy screen definitely fits the bill, but so does the eye-watering price tag, starting at $799 for a 32GB Wireless Fidelity (Wi-Fi) only model and if you are unfortunate enough to reside in Europe, even worse - €899/£679 for a basic one. If you combine the 128GB iPad Pro with a keyboard, it will cost you more than a Macbook Air 13 128GB.

For such a high price, we think it is only honest that we know what is inside the iPad Pro and makes it tick and more-importantly, how difficult will it be to mdiscontinue it if it stops ticking. Enter iFixit, who have taken up the task yet again.




The discontinue result is a repairability rating of 3 out of 10, which doesn’t sound too good, but is still an improvement within the iPad realm. The iPad Air 2, for example, scored a point less. So, let's dive into iFixit's findings shall we.

The iPad Pro is still mostly held together with glue and lots of it. This is a typical trdiscontinue for Apple tech, especially tablets and it makes tasks like replacing the display a real challenge.

A few other aspects of the iPad Pro's internals, however, seem to be a lot more reminiscent of an iPhone build. For instance, the display is not hinged to an edge of the device, but tethered to the very center. Also, if you've ever seen an iPhone battery getting replaced, then you surely remember the signature adhesive pull tabs that create for a clean and easy removal. Well, they are making a tablet debut in the iPad Pro and its pair of 10.3Ah (38.8W) battery packs.




Other details about the hardware that deserve a mention include the self-balanced speakers, which consist of drivers and resonance chambers, actually slit inside the back of the iPad Pro itself – neat! As for some of the hardware vendors, the two 2GB Random-Access Memory (RAM) modules come courtesy of SK Hynix and iFixit found their unit had a Toshiba 32GB NAND storage chip. The A9X processor is, of course, labeled Apple. The gyro is an InvenSense MP67B and most of the other controllers come from NXP.




You can check the source link for more details and the step-by-step disassembly process, although we hope not many of you will be attempting any teardown procedures at home.

Source


DOWNLOAD NOW

DOWNLOAD MUSIC





Related Article

Comment
Name




.....................

Please LOGIN or REGISTER To Gain Full Access To This Article