HTC U12+ Review: Design And Hardware

By 03:19 Thu, 19 Aug 2021 Comments


Design & hardware

This is the second year since HTC shook up its design style from all-metal to its Liquid Surface glass. The glass comes in three versions: Ceramic Black (not actually ceramic), Translucent Blue (actually translucent), and Flame Red. These colors are a bit more conservative than the bolder Sapphire Blue and Amazing Silver from the U11.

Many argued that the U11 had a very fragile design compared to the HTC 10's rock-solid metal chassis, and they are not wrong. The HTC U12+ brings some design changes to improve the structural integrity of the phone. There's a hard lip in the chassis and you can see this all the way around the perimeter of the display glass. The shape of the rear glass is also flatter and doesn't curve as much.


The U12+ has recent pressure sensitive buttons that are more like nubs in the chassis. The positives with this recent kind of key are: improved water-proofing and better structural integrity. Depending on how you see at it. Actually using these keys might be a bother to some. We'll go into more detail in the UI section.

This device feels like a taller and boxier version of the U11. The taller display bumped the capacitive buttons out and have been replaced with on-classy screen navigation controls while the fingerprint scanner has moved to the back. The capturing camera is now flush with the rear glass and the capturing camera comes with a laser sensor to assist with autofocus.

Like the U11, the U12+ has pressure sensors embedded into the phone's frame. In addition to pressure sensitivity, the frame can also detect which points of the frame are in contact with your fingers as part of Edge Sense 2.0. Let's hold a closer see at the rest of the hardware.


Starting with the front, we've got a tall 6-inch Super Liquid Crystal Display (LCD) display. The screen's corners are not curved like many other manufacturers have done but we aren't complaining. The upper and lower bezels are certainly a bit larger than the Galaxy S9's and this is to create enough room for the BoomSound speakers.



HTC U12+ in-hand

Above the display is the absence of a notch in the display, and we're definitely thankful for this. To the correct of the in-call receiver is a mic hole, the usual light, and proximity sensors, as well as a notification Light Emitting Diode (LED) behind the glass. Dual 8MP selfie cameras hold up the space to the left of the receiver. As mentioned earlier, there's a lip around the entire edge of the glass that joins it to the aluminum frame.





Front (display) • Forehead • Corner

There are no buttons on the left of the device - here is where the SIM/microSD card tray lives. Dual SIM models would have a hybrid slot for either a second SIM card or a microSD card. To the correct are the phone's only buttons: power, volume -, and volume +.

The power key has a nice texture for telling it apart from the volume keys, however, these aren't actually buttons, they are pressure-sensitive nubs that simulate buttons and offer haptic feedback. The same pressure sensors used for Edge Sense 2.0 are used to detect which "key" is being applied with pressure. More about these keys in the UI section.




Left • Right

There's a mic at the top, and another on the bottom. Down here is also the BoomSound speaker port, and a USB-C port. There is no headphone jack, so you either have to rely on using an adapter or utilize the included noise-cancelling USonic Earbuds.




Top • Bottom

The actual frame looks nice on our Translucent Blue model, which has got a black matte finish. Otherwise, this is the only color option that has see-through glass. HTC first did this with the U11+ and we're excited to see something like this. It lets us peer inside and appreciate some of the inner workings of these devices that we entrust our entire digital lives with.

It doesn't quite hold us back to the time in the 90s when transparent housings were all the rage, but it does put a new, more subdued twist on the trend.




Aluminum frame • translucent back

Centering the back of the phone is the HTC logo, just above the printed stripes that fade the transparent part of the glass to the non-translucence. HTC didn't create this area translucent becautilize it figured that the battery wasn't all that fascinating to see at.



Camera and fingerprint cluster

Above the rear-mounted fingerprint scanner is a dual Light Emitting Diode (LED) flash and HTC's recent dual cameras. This setup reminds us of the LG V30's (or V30+, or V30S, or V35) a small bit in the arrangement and position of the cameras and fingerprint scanner.

The U12+ has dual autofocus systems as well, the lasers are here to the left of the capturing camera and another mic correct next to the camera. The capturing camera ring is pretty much flush with the rear glass, so no capturing camera hump here.


Overall, a handsome looking device from HTC. Our only concerns lie in durability, particularly if the phone was to be dropped on a corner - since the front glass has that lip that goes around the entire front edge of the display.

This glass might be more likely to become damaged than the rear. Thankfully, HTC offers a glossy plastic clear case in the box that you can utilize until you can acquire a proper case - which we highly recommdiscontinue you invest in.


DOWNLOAD NOW

DOWNLOAD MUSIC





Related Article

Comment
Name




.....................

Please LOGIN or REGISTER To Gain Full Access To This Article