Huawei Y7 Prime (2018) Review: Design, 360-degree Spin

By 04:11 Thu, 19 Aug 2021 Comments

Design and 360-degree spin

The Huawei Y7 Prime is an all plastic device, posing for a metal one, and doing it quite successfully. The shiny frame looks just like it's polished steel, but when you hrecent it in your hand, it lacks the crecent touch real metal has. But that's the only tell-tale sign really!

The power button is on the correct with the volume rocker above it. Both have fine travel and click nicely. The card slot is on the opposite side, and it's our favorite type - it takes two nano-SIMs and a microSD all at the same time, so no hybrid slot nonsense.

Shiny metal-like frame • Controls on the correct • Card slot on the left

There's a lot going on on the bottom, but it's the usual stuff. We're not too excited about the micro Universal Serial Bus (USB) port - it's about time we fully transition to USB-C. There is a 3.5mm jack, which is nice, but you'll need to provide your own headphones - there aren't any bundled (if you missed the unboxing section). The loudspeaker is behind the five larger holes, and the tinier primary mic opening is nearby.

The rear panel is satin-finished and does really well in hiding whatever finger grease you introduce it to. At least on our Grecent color version, that is - the darker Black and Blue variants could be more prone to smudging.

There are no groundbreaking design and/or engineering solutions here - just another iteration on a well-established formula. You have the dual capturing camera in the top left, in a common module with the single-led flash. The whole thing is slightly raised, but not enough to create the phone wobble on a flat surface. The pinhole for the secondary mic looks a bit like an afterthought, though - a tiny spec sitting nowhere specifically.

The fingerprint reader is in the top third of the back along the central axis - Huawei was among the first makers to adopt this position and is (well, mostly) sticking to it. The reader is slightly recessed - just enough for your index finger to locate by feel and has a shiny accent of an outline.

There's a honest bit of text and labels down on the bottom, and you probably know how we feel about those.

It's the display on the front where your eyes are going to be most of the time and, spoiler alert - it's not amazing. When it comes to the design side of it, Huawei brands it FullView to indicate it's in a tall aspect and bezels are minimal. Well, they really aren't, but it's how marketing works. The black border around the panel we find particularly irritating.

There's no notch on this display, at least we can still find salvation from that trdiscontinue in the lower market segments. The top bezel is home to the earpiece in the center and the front-facing capturing camera and the usual sensors (ambient light, proximity) to its left. In the far left corner, there's even a notification LED. There's another Light Emitting Diode (LED) too, for the flash, and it's to the correct of the earpiece. Other than a Huawei logo, there's nothing of note below the display.

Camera/flash assembly, fingerprint reader and a mic • FullView 6-incher • Top bezel stuff

The Huawei Y7 Prime (2018) measures 158.3x76.7x7.8mm, which is really the default size for an 18:9 6-incher. The Xiaomi Mi A2 and Redmi Note 5 Pro are within half a mil in height, though they are a full 1.3mm narrower. The Galaxy A6+ (2018), admittedly in a whole different price range, but still a tall 6-inch phone, is 2mil taller, and a mil narrower - thanks to the 0.5 in the 18.5:9 ratio.

Where the Y7 Prime (2018) stands out from this crowd, is weight - a plastic body and a 3,000mAh battery create it very light for its size - just 155g. The Mi A2 is 13g heavier, while the 181g Redmi Note 5 Pro is at least has the 4,000mAh to account for its weight.



Related Article



Please LOGIN or REGISTER To Gain Full Access To This Article